PU foam purchasing
PU Foam Yield: How to Compare Supplier Claims
A can’s volume and its stated expanded foam yield are different measurements. Neither figure, by itself, tells a distributor how many window openings an installer will finish. A useful buying comparison identifies the test conditions, the joint geometry and the amount of material that is usable in the actual task.
By QINRUN · Updated
Separate three numbers in the quotation
- Pack information: the stated can size and net content, with units.
- Declared yield: the volume of expanded foam reported under a stated method and conditions.
- Practical coverage: the length or number of representative gaps completed in a trial.
Ask whether a figure describes free expansion or a defined joint test, and request the test method. Figures obtained under different methods should not be treated as directly equivalent. Do not multiply the external can dimensions to estimate its usable contents.
Use joint geometry for an initial estimate
For a simplified rectangular cavity, the final geometric volume in litres is:
Width (mm) × depth (mm) × length (m) ÷ 1,000
For example, an agreed 20 mm × 30 mm cavity over 50 m has a geometric volume of 30 litres. If an illustrative trial delivered 25 usable litres per can in that same task, the arithmetic would be 30 ÷ 25 = 1.2 cans, rounded up to two whole cans before any further allowance.
These are hypothetical planning values, not QINRUN yield data or a recommended joint design. The calculated final cavity volume is not the amount of uncured foam to dispense. Follow the selected product’s filling instructions.
Make the sample trial reproducible
Agree on a representative gap and record its dimensions, surface condition, temperature, humidity, product batch, dispensing tool and preparation. Record the observation time and the method used to judge the finished result. Note unused material and trimming separately.
One-component moisture-curing foam is illustrated in Sika’s product documentation. That is a reason to record trial conditions, rather than assuming that every can will deliver the same outcome in every environment.
Calculate cost per useful result
Compare price per completed metre or per measured usable litre only when the test method and application are comparable. A high advertised expansion figure is not a substitute for the product’s other specified requirements.
For distributors, keep the agreed model, packing details and sample evaluation with the order record. If a formulation, applicator or supplier changes, check whether the original comparison still applies before repeating a coverage claim.
What should you ask a PU foam supplier?
Request the current TDS, yield method, application limits, dispensing format, pack information and sample availability. Include your customer’s typical gap and destination. Ask for the basis of any proposed consumption estimate.
Browse QINRUN PU foam and filling products, then compare gun-grade and straw formats. Keep transport and document questions in your international order checklist.
Technical references
Manufacturer references explain general principles. They are not QINRUN test reports or evidence of equivalent product performance.